sedum burrito succulent care Burro’s Tail Succulent
SKU: 90192467679
sedum burrito succulent care

sedum burrito succulent care Burro’s Tail Succulent

Sale price$24.98 Regular price$27.76
Save 10%

Pay in installments of $6.94 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

sedum burrito succulent care Burro’s Tail SucculentIntroducing the burro's tail succulent, known as Sedum morganianum Burrito (or Sedum burrito), which is a perfect choice among gardeners. Native to Southern Mexico, this Sedum burrito plant is like a superstar hanging from your ceiling, with its mesmerizing trailing stems. While it may resemble a donkey tail plant at first glance, this gorgeous burrito sedum has shorter stems and smaller, more rounded leaves than the donkey tail succulent. This

Introducing the burro's tail succulent, known as Sedum morganianum Burrito (or Sedum burrito), which is a perfect choice among gardeners. 

Native to Southern Mexico, this Sedum burrito plant is like a superstar hanging from your ceiling, with its mesmerizing trailing stems. While it may resemble a donkey tail plant  at first glance, this gorgeous burrito sedum has shorter stems and smaller, more rounded leaves than the donkey tail succulent. 


This burro's tail succulent gets its scientific name, Sedum 'Burrito', from its long, oval- or tear-drop-shaped leaves that grow down the stem, and look like the tail of a burro.

When mature, these large burro's tail plants trailing stems reach 3–4 feet long.

The stems of the burro tail plant are covered in small, fleshy, blue-green leaves that grow in a spiral pattern along the length of the stem. The leaves are about 1 inch long and are arranged in pairs along the stem.

The flowers of Burro's tail plant bloom in spring with little star-shaped pink or red burro’s tail flowers that will burst into bloom with bright yellow stamens.

To propagate Sedum burrito, it is best to take stem cuttings or leaf cuttings during the spring or summer months when the plant is actively growing. Place the cuttings in a well-draining soil mix and keep them in a bright, indirect light location to encourage root development. However, the burro's tail care is less fragile overall, making it a great choice if you're new to growing succulents in hanging baskets. 

Plus, it is safe for humans but can be mildly toxic for pets if consumed. So, keep it away from pets and children. 

Watering Needs 

One of the coolest features of the burro's tail plant is the way it stores excess water in its leaves. That means you don't have to water this succulent plant as frequently as you might think; just make sure the topsoil is completely dry before giving it another drink to help its roots develop properly. This helps avoid overwatering and keeps your plant healthy and happy! 

During the spring and summer, this drought-tolerant Sedum burrito should be watered about once a week. During the winter dormant period, the sedum plant can be watered less frequently, about once every two weeks. It's important to make sure the soil is well-draining, as the burro's tail succulent is susceptible to root rot if it sits in water for too long, which affects the root growth. 

Remember, keep the soil moist but not soggy by misting it frequently whenever you notice the surface of the soil drying out.

Light Requirement 

To grow your burro's tail indoors, a bright windowsill or a location near a sunny window is a great place for the burro's tail succulent. It should be placed about 12 inches away from the grow light and should receive about 12–16 hours of light per day. 

If the burro tail doesn't receive enough bright light, it can become leggy, and the leaves may fall off.  The Burro's tail Sedum burrito can also be grown under artificial light, such as a grow light. This is a great option for people who live in areas with insufficient light or who want to grow succulents indoors.

For outdoor cultivation, your burro's tail prefers full sun to partial sun. The sedum plants should be placed in a sunny spot in a location where they can receive plenty of bright light but not too much direct sunlight. As direct sunlight can cause the leaves to burn, it's important to protect them from the hot afternoon sun.

Optimal Soil & Fertilizer Needs 

The Burro's tail prefers well-draining potting soil that is rich in organic matter. A succulent soil mix is a great choice for the burro's tail succulent, as it provides the drainage that succulents need. The soil should be allowed to dry out completely between waterings, as the plant is susceptible to root rot if it sits in water for too long. Ideally, you want to use our specialized succulent potting mix that contains 5 natural substrates and organic mycorrhizae to promote the development of a strong root system that helps your burro tail succulent thrive. 

The sedum burrito doesn't require a lot of fertilizer, but it can benefit from a light application of a balanced, natural fertilizer with an equal mix of NPK (5-10-5) during the growing season in the spring. It's important to avoid over-fertilizing the burro tail, as this can cause the leaves to become soft and weak. Overall, the Burro's tail is a low-maintenance succulent that doesn't require a lot of fertilizer to thrive. 

Hardiness Zone & More 

When growing indoors, your Sedum burrito burro's tail prefers temperatures between 60 and 75°F. The baby burro's tail succulent doesn't require much humidity, but it can benefit from occasional misting during the dry winter months.

When growing outdoors, it is hardy in USDA zones 10–11, which means it grows and can tolerate temperatures as low as 30°F. The burro's tail succulent prefers warm temperatures and can be grown outdoors in full sun or partial shade. The burro's tail is a hardy plant that can tolerate a wide range of temperatures and humidity levels.

Final Thoughts

Overall, the burro's tail succulent (Sedum burrito), with its cascading stems and plump, trailing leaves, adds a distinct and eye-catching element to any space. This succulent is not only visually appealing but also easy to care for. Its ability to store water in its leaves allows it to withstand periods of drought, making it a low-maintenance choice for plant enthusiasts. Whether you choose to hang it on a macramé hanger or let it spill over the edges of a pot, the burro's tail succulent is sure to bring a touch of natural beauty and charm to your home or rock garden.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 90192467679

Discover Niche Categories That Outsell sedum burrito succulent care

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 364 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cindy
Louisville, US
★★★★★ 5
Oxidized fiberglass RV looks new again!
WOW! I researched high and low for a product that would bring back the shine to our 10 year old travel trailer that has fiberglass panel siding. There were countless videos watched, numerous products tried without success and then I discovered PoliGlow Restoration Fiberglass Kit for boats and RVs. It came with the cleaner and pad to remove the oxidation and a bottle of Superior Fiberglass Restoration, Protection and Shine. This product is amazing. The condition on the exterior of our RV had become a bit embarrassing, but now it shines with the newest of them. The instructions are easy to follow, there are even videos of the process! It does require several coats of the Restoration and Shine product. The cost is extremely reasonable for the end result of the RV. The shine is amazing! Highly recommend this product. PS It was extremely easy to apply as I had my husband do it, he didn’t complain at all and was thrilled with the result!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 24, 2025
C
Verified Purchase
CV S.
Cuba, US
★★★★★ 5
Wow this stuff works!!
Wow. What an amazing product. I own a 1976 Bertram 42 aft cabin motor yacht. The previous owner had not waxed it in a good long time. I spent a weekend with four friends sweating and laboring using the traditional wet sanding, buffing, and waxing it's heavily oxidized finish. One of the friends helping was a former professional boat detailer. The results were ok. The wax job lasted about six months before it looked like crap. There's a lot of controversy over Poli Glow. A number of the old fellows who sit around drinking coffee in the marina clubhouse swear that nothing should go on a boat except the most expensive and laborious traditional wax, preferably applied by a crew of of professionals. They universally ranted about the failings of Poli Glow despite having no practical experience. They also talk more than they actually boat, so I didn't listen to them. I was cautious, and started with my heavily oxidized flybridge. I wanted to work my way top to bottom and I figured if I hated the look, I could stop and it wouldn't really noticeable. It was easy to use. I bought the complete kit. Mixed the prep. Sprayed and scrubbed. Wow that stuff gets things clean and even. I wiped the Poli Glow on with the provided mitt. Tip: really, you needs to let each coat dry before applying the next. It was noticeable alright. From the dock you can now see an actual reflection of my antennae in the now shiny Fiberglas. It's amazing. I did find that the more oxidized portions were thirsty as heck and took a lot of coats. The results are worth it. Application is way less laborious than buffing and waxing. If you can wipe clean a countertop in your kitchen or galley you can Poli Glow like a pro. It's that stupidly easy. Where the gel coat was reasonably smooth the product built a mirror finish. I didn't even put her on the hard. I applied it while it was docked. I couldn't have five that with a buffer. My pro detailer friend was totally surprised at the result. Bottom line: if you have an older sad looking boat this stuff can make it shiny and happy with minimal labor. Good stuff well worth the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 29, 2017
P
Verified Purchase
pdb
Fort Morgan, US
★★★★★ 4
Overall great product, especially on solid colours.
I bought a 33 year old boat that is mostly white gelcoat. Some of the white had yellowed in areas and there were bright spots where I removed stickers and hull numbers. The boat also has red and blue metal flake that was quite faded and gritty. The flake is large particles of metal or paint or whatever, not fine little glitter bits like they do now. I called Poli Glow Canada and the guy told me to use 600 grit wet sandpaper to smooth out the metal flake and then wash with the Poli Prep. The white came up pretty clean, but I had to use the sandpaper on some areas to take off the yellow. The Poli Glow went on really easily and quickly. When you are doing it, keep an eye on the the edges of the applicator. If the liquid starts to harden, wash the edges in warm water to get them soft again. I didn't do this and have some small bumps kind of like fuzz off a paint roller, which I guess is bits of dried liquid that came off the applicator. You will also get streaks if the edges are dry, but the next coat fixes that right away. Check after each coat to ensure it is smooth. I'm pretty sure a quick pass with the sandpaper would have removed the bumps, but by the time I was finished, I didn't want to mess with it. In the end, the white turned out looking great. The flake is definitely better than when I bought it, but it only shines at about 50% of original (compared to the flake on the transom which was in really good condition) and I was expecting better based on the before and after shots on their site. There are also some streaks in the flake from certain angles where I guess my sanding pressure wasn't consistent.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2013
T
Verified Purchase
The skinny...
New York, US
★★★★★ 5
I am hard to please...especially expensive products...
K...So I have this 26 ft. sailboat. I have all the professional equipment you can use to restore fiberglass shine. However, a 15 year old sailboat's topside will usually have pitting that you COULD sand down and shine.. but this is a risky step as you think the gelcoat and if you go through, now you have an eyesore of an entirely different nature... My only problem with trying this was the idea that it would fade out shortly and possibly yellow. However, a bigger concern is continued breakdown of the glass surface. An over-riding concern. Wax on a surface that is pitted is usually short lasting and does shine well..good for 3 months, maybe. I bit the bullet and bought this after looking at it's competitors. BUY THE KIT, NOT JUST THE POLIGLOW. The cleaner worked better than any other I have bought. I don't know why. It just did. The scrubbing sponge is perfect for the job. I used a smaller dishwashing scrubber in tight spaces..it seriously was inadequate. This kit was made right, I'm thinking. Following the directions to apply per the bottle. I was skeptical about using a damp mit. I have done the entire cockpit area of the boat at this point with 6 coats and used maybe a half an inch of the product. And the boat looks absolutely AMAZING. Will this yellow? Will it last a year? IDK, but other reviews suggest positive experiences on both counts. Best of all, this will HALT the ongoing beating the topsides takes. (On another note, don't use this on nonskid. It's slick..just my opinion, maybe no more slick than new nonskid. But there is a really great product if you search "nonskid fiberglass surface restorer." Expensive but works.) Best description I can give you on how this will turn out is .. you know how good a surface that is aged looks when you wet it? That..but it stays. Yes, you will need 4-6 coats. But it dries very quickly and still doesn't use much product. At this performance level, the price was worth it. And I am frugal beyond belief. I would recommend that you do professionally buff any fiberglass surface with a good medium one step cutting compound and a professional buffer before you apply this to get best results. DO NOT USE THIS ON SURFACES THAT ALREADY ARE SHINY. It says so right on the kit. I also agree your smoothest outcome will come at room temp vs applying int the sun or significant heat. It dries quickly and doesn't even out as well before drying. Still, it will look great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2016
J
Verified Purchase
Jake D.
Fort Morgan, US
★★★★★ 5
YOU WILL LOVE IT!!!
This is the best product I’ve ever used on our boat! We have a 26-year-old Tige wakeboard boat that had heavy oxidation and water spots. In addition to a heavily faded gel coat. I spent a few hours working on it and it completely restored our boat! I got the recommendation from my father in law after he used it on his RV. The results speak for themselves. I highly recommend this product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026

recommand products